Reflective Chevron Strips for Diamond Plate NFPA

Reflective Chevron Strips for Diamond Plate NFPA
Click To Enlarge
  * Marked fields are required.
Qty*
Price $18.00

QUANTITY 1 - 1 SQUARE FOOT OF COVERAGE

NFPA 1901 1917 Prismatic Reflective Chevron Strips

  • Quickest way to create chevron patterns on diamond plate.
  • Only $18 per square foot of coverage.
  • About 4 times faster application than dots.
  • Cleaner nicer looking chevrons with more coverage.
  • Single layer patented film and will not delaminate like other brands.

These custom designed shapes are cut from Reflexite/Orafol V98 prismatic material.  This material is specifically designed for emergency vehicles. Reflexite invented prismatic reflective films and is the leader in this type of material. It is the only film we use for our custom shapes.


Note - to assure a proper fit, you should test a free sample on your diamond plate before purchasing. 


This product comes in four styles, A, B, C and D.  Style A is for diamond plate where the tips are exactly 1" plus 1/32 apart.  Style B is for diamond plate where the tips are exactly 1" apart.  Style C is for diamond plate where the tips are 1" less 1/32" apart.  Style D is for diamond plate where the tips are 1" less 1/16" apart.  When you order our sample pack you will get one of each and they will be marked A, B, C or D.  This will insure that you get a perfect fit.

 

To install our "chevron strips" you simply peel, position, and press on.  Each strip takes just a few seconds to install.  The design is made to go around the diamonds.   

Testing the strips before purchasing is highly recommended.  To get a sample pack of our diamond plate reflective products cut from V98 material just email me atsteve@reflectivestore.com or call 850-934-3157.

We sell this product based on the square foot coverage. One square foot of coverage or 24 strips runs $18.  This makes it simple to estimate how many strips you need.  Just measure the area you need to stripe and calculate how many square feet you have.  If you have 10 square feet you would need 5 square feet of red strips and 5 square feet of fluorescent lime. 

How to Order

This product comes in four styles, A, B, C and D to accomodate 4 diamond plate spacings. Testing the strips ahead of time will insure that you get a perfect fit.  Since the strips are not returnable it is important to test first before ordering.  There is a drop down box below where you can choose the style that fits.  

Our Reflective Chevron Strips run $18 per square foot of coverage or 24 strips. A 12" x 12" area of diamond plate would require 1 square foot of strips ($18). You can make your square footage selection below in the little box. As an example, for 10 square feet you would need 5 square feet of red and 5 of lime.  So for 5 square feet of red you would enter 5 in the box above and select red and then click "add to cart". Then do the same for fluorescent lime.  (Each time you would need to specify the size/style that fits you diamond plate.)

In summary,

- In the ordering section below you will first choose the color. 

- Then you will choose the style (size) you need (A,B,C,D) based upon a test of your diamond plate. 

- Then you will enter the number of square feet that you need to cover in the box above. (24 strips per square foot)

If you have any questions just call at 850-934-3157 or email me.


To read our article on  how to estimate the number of shapes you will need for your diamond plate click here.